HDB Interior Design Singapore: Pasir Ris Kitchen A Room-by-room View
HDB interior design Singapore owners in Pasir Ris are reworking kitchens to suit larger families, and a room-by-room view helps. Newer BTO kitchens are induction-ready, which changes how you plan power and storage. Whether your flat is a resale or a recent BTO, the kitchen must follow HDB's rules on structure and services.
Pasir Ris kitchen layout by zone
A typical 4-room Pasir Ris kitchen spans roughly 6 to 8 square metres. Split it into three working zones: the wet zone near the sink and washer, the cook zone with the hob or induction, and the prep and storage zone with the counter and cabinets. Keep a clear pathway of at least 900 millimetres between the sink and the cooker so two people can work without bumping.
The wet area usually comes tiled by HDB in a BTO flat. You can overlay HDB approved flooring such as vinyl in the dry part, but the wet area keeps its original tile for waterproofing reasons. Plan your carpentry to meet the tile edge cleanly. Smart HDB interior design Singapore practice keeps the wet and dry zones separate so moisture stays controlled.
HDB interior design rules for kitchen renovation in Pasir Ris
Structural walls, beams, and columns cannot be hacked. The household shelter stays untouched with its door in place. An HDB open concept kitchen is allowed, so many Pasir Ris owners remove the kitchen wall to join the dining area, provided the wall is non-structural and the permit drawings reflect the change.
New BTO kitchens are induction-ready. If you want gas, the installation must follow SP Group and SCDF rules, including the gas pipe route and a compliant hood. Submit your plan through an HDB Licensed Renovation Contractor; the HDB renovation permit takes about 2 weeks to process.
Noisy works such as hacking and drilling are allowed only on weekdays from 9am to 6pm. None on Sundays or public holidays. Coordinate this with your neighbour, since kitchen walls are often shared.
Step-by-step kitchen planning
- Mark the three zones on a plan and confirm the non-structural wall you intend to open.
- Choose induction or gas early, because the power load and the hood differ between them.
- Select quartz or solid-surface countertops and laminate carpentry for the cabinets.
- Add a pull-out pantry and cantilever table to make the most of a small footprint.
- Submit the permit with your contractor and schedule noisy works within allowed hours.
These steps fit neatly into a BTO renovation timeline of roughly 8 to 12 weeks from key collection to handover of the kitchen. A clear plan avoids the delays that push a family's move-in date back.
Storage and lighting that suit a family kitchen
Use built-in cabinets up to the ceiling with a slim bulkhead to hide trunking. Under-cabinet LED strips light the counter for safe chopping. For HDB flat space saving, a cantilever breakfast table folds away when not in use, freeing the floor for movement.
Pasir Ris families often host grandparents and children together, so the kitchen benefits from an open link to the dining space. Concealed lighting in a shallow false ceiling keeps the room bright without lowering headroom.
Your Pasir Ris kitchen works best as part of a full plan. When the zones, the HDB open concept kitchen decision, and the storage are designed together, the result suits daily family life. Our whole-house customization service plans the kitchen alongside your living and dining areas so the whole flat feels connected and practical.
