HDB Interior Design Singapore: Pasir Ris TV Feature Wall A Clear Plan
HDB interior design Singapore owners in Pasir Ris plan the TV feature wall as the living room centrepiece. HDB allows non-structural feature walls of laminate and light partitions, while load-bearing walls stay intact. This clear plan covers layout, cabling, and the step by step build so the wall looks built-in, not bolted on.
what HDB interior design Singapore allows for feature walls
A TV feature wall uses non-structural laminate panels fixed to a load-bearing wall, so the structure stays. HDB approves lightweight partitions if you need to split the space, and the bomb shelter door must remain if the wall sits near it. Keep the build within the HDB renovation permit and the plan passes without a query. The panels add no load, so they fit the renovation scope for a 4-room or 5-room flat. Paint the rest of the wall to match so the feature reads as one surface.
layout and sizing for a Pasir Ris living room
A 4-room Pasir Ris living room is about 20 to 25 sqm, enough for a 2.4m to 3m feature wall. Centre the TV on the wall and leave 300mm each side for open shelves. Keep the sofa at least 2.5m back so the screen sits at a calm eye line. A low console under the panel hides the set-top box and the router.
- Width: match the wall, leave a small gap to the corner.
- Height: stop the panel below the beam line.
- Shelves: open on one side, closed on the other for balance.
- Console: low and long to ground the feature.
step by step build plan
- Engage an HDB Licensed Renovation Contractor and submit the HDB renovation permit, about 2 weeks to process.
- Fix the TV size and the console length before the panel is drawn.
- Build the laminate frame on the load-bearing wall, no hacking of structure.
- Run the cables inside the panel with a licensed electrician within weekdays 9am to 6pm.
- Add LED strips behind the panel for a soft wash at night.
- Fit the TV and check the view from the sofa before the painter leaves.
cable and device management
A feature wall fails when cables show. Build a chase behind the panel for the HDMI and power, and a shallow box for the router. Use a brush plate at the console so the leads stay straight. For HDB interior design Singapore homes, a clean cable run keeps the living room tidy day to day. HDB flat space saving comes from the console that replaces a free-standing shelf. Whole-house customization lets you match the panel laminate to the TV wall in the bedroom.
cost and timing
A TV feature wall runs about S$1,500 to S$4,000 in the current market, a range that moves with panel size and the LED add-on. Treat this as a market range, not a fixed quote. The BTO renovation timeline places the living room after flooring, so plan the wall with the rest of the carpentry. Match the laminate to the kitchen so the flat reads as one home from the door.
When you plan a Pasir Ris TV feature wall as part of a full home package, the panel, console, and lighting are drawn as one so the living room feels built, not bolted. Talk to our team about whole-house customization and we will match the feature wall to the rest of your flat in a single plan.
