HDB Interior Design Singapore: Pasir Ris TV Feature Wall A Room-by-room View
HDB interior design Singapore owners in Pasir Ris often ask for a TV feature wall that works across the whole flat, not just the living room. A feature wall sets the tone for the home, and HDB rules still shape what you can build. The smart move is one consistent language from room to room.
why a feature wall matters in Pasir Ris flats
Many Pasir Ris flats are 4-room or 5-room, with about 90 to 110 square metres. The living room feature wall becomes the visual anchor. A consistent material then carries into the bedrooms so the flat feels planned. This is part of HDB flat space saving, because one built language avoids clashing additions that waste space.
I worked on a Pasir Ris BTO where the living wall used laminate fluting and the bedrooms picked up the same line. The result read as one home rather than separate rooms done by chance.
what HDB interior design Singapore rules allow for feature walls
HDB rules forbid hacking structural walls, beams, and columns. A feature wall is usually a laminate or light partition fixed to a normal wall, so it is allowed. The bomb shelter door must stay, so do not build a feature panel across it. An HDB renovation permit is required before works begin, and the job must go through an HDB Licensed Renovation Contractor.
living room: the main feature wall
The living room wall holds the television, the console, and often the distribution point for cables. Build a recessed cavity for the set-top box so cables hide. Use laminate carpentry for the panel and a quartz or solid-surface ledge below. Keep the wall clear of the window grille area above certain floors.
master bedroom: a calmer echo
The master bedroom feature wall sits behind the bed. Here the television is optional, so the wall can be a simple upholstered or laminate headboard panel. Match the living room line but soften the colour for sleep. I suggest a lower contrast than the living room so the room rests the eye at night.
common bedroom: flexible and light
A common bedroom used for guests or a growing child needs a lighter feature wall. A slim laminate panel with a floating desk below doubles as a study nook. This keeps the room useful without a heavy build. Use HDB approved flooring such as vinyl under the desk chair for easy cleaning.
step by step: planning a consistent feature wall
- Choose one material and one groove pattern for the whole flat as the base language.
- Measure each wall and note the television size for the living room cavity.
- Mark the bomb shelter door and keep a clear margin around it.
- Decide cable routes and build a hidden cavity in the living room panel.
- Confirm the wall is non-structural with your contractor before fixing.
- Apply the same edge detail in bedrooms, with softer tones.
- Install lighting, such as a warm LED strip, to lift the laminate grain.
avoid mixing too many finishes
The mistake is using stone in the living room, wallpaper in one bedroom, and paint in another. The flat then looks pieced together. Pick one feature language and vary only the tone. This discipline is what makes HDB interior design Singapore projects feel calm rather than busy, and it also costs less than three separate schemes.
When you plan HDB interior design Singapore feature walls, consistency beats novelty. Our whole-house customization service designs one feature language across every room so the flat reads as a single home. Reach out to our team for a Pasir Ris feature wall plan that flows from the living room to the bedrooms.
