HDB Interior Design Singapore: Pasir Ris TV Feature Wall Checklist

HDB interior design Singapore homeowners in Pasir Ris frequently ask for a TV feature wall that hides cables and anchors the living room. The move toward open, low-profile layouts means the wall now carries storage, lighting, and the screen in one plane. A clear checklist prevents costly rework and keeps the build within HDB's limits.

Why the TV feature wall matters in a Pasir Ris flat

Pasir Ris flats range from older resale blocks to newer BTO stacks, but the living room is always the showpiece. A 5-room flat is about 110 sqm and the living wall is the largest flat surface you own. Done well, the feature wall removes visual clutter and makes a compact room feel ordered. I have walked into Pasir Ris resale units where a messy wall made the whole home feel smaller than its 90 sqm.

Budget-wise, the feature wall is where carpentry spend pays off most. It replaces a console, a bookshelf, and a cable box with one built element. This is core HDB flat space saving because vertical planes store more than floor items.

What HDB interior design Singapore rules allow on feature walls

You can build carpentry on a non-structural wall freely, but you cannot hack load-bearing walls, beams, columns, or slabs. The bomb shelter / household shelter cannot be renovated; only light fittings and laminated flooring are allowed inside, and the door must stay. Do not plan a feature wall across the shelter opening or fix anything into a window grille on higher floors.

Any feature wall listed on your HDB renovation permit must show it is non-structural. The HDB Licensed Renovation Contractor submits the plan through HDB's Directory of Renovation Contractors process, and permit processing takes about 2 weeks. Plan the wall after the permit, not before.

Your pre-build checklist

• Confirm the wall is non-structural by checking the flat's plans with your contractor.
• Mark every power point, the fibre entry, and the TV aerial so the carpentry leaves access.
• Decide the screen size and the centre height, usually 1000 to 1100 mm from the floor.
• Plan a 50 mm recess behind the TV for flush mounting and hidden cables.
• Choose storage needs: open shelves, closed cabinets, or a mix for the Pasir Ris lifestyle.
• List the wall on the HDB renovation permit drawing before works begin.
• Set a market budget; a 4-room BTO feature wall often lands in the S$3,000 to S$6,000 range, a resale more with rewiring.

Step by step to build the wall

1. Clear the wall and protect HDB approved flooring with board during works.
2. Fix the carcass to the floor and side walls only, keeping clear of the structural edge.
3. Run the power and HDMI through the recess using proper trunking.
4. Mount the panel in laminate or matte finish, aligning the TV cut-out.
5. Fit push-to-open doors on upper cabinets to avoid visible handles.
6. Add LED strips in the recess for a soft Pasir Ris evening glow.
7. Test the screen, check the doors, and confirm the permit inspection passes.

Finishes that suit a Singapore home

Laminate carpentry resists humidity better than raw wood and comes in tones that suit a bright flat. Quartz or solid-surface tops on a side console wipe clean after snacks. Use HDB approved flooring throughout so the room reads as one scheme.

A feature wall pairs well with HDB open concept kitchen flow, letting the living zone blend into the dining sightline. Keep the palette calm so the screen, not the cabinet, draws the eye.

A TV feature wall is the single best upgrade for a Pasir Ris living room, but the permit, the structure, and the cable plan must align first. Our whole-house customization team measures your exact wall, designs storage around HDB rules, and builds carpentry that hides the clutter. Contact us with your flat type and we will turn the checklist into a wall you enjoy every night.