HDB Interior Design Singapore: Pasir Ris TV Feature Wall Things To Consider
HDB interior design Singapore TV feature walls in Pasir Ris need more thought than a pretty panel, because the wall hides cables, holds weight and sets the room's calm. A recent HDB trend uses low laminate consoles with a stone-look panel, which suits the open living rooms of 5-room flats of about 110 sqm. Weigh these points before your HDB renovation permit goes in.
Wall structure comes first in HDB interior design
Structural elements such as load-bearing walls, beams, columns and slabs cannot be hacked. Your TV feature wall is almost always a non-structural partition or the flat's own wall, so check which before you drill. Careful HDB interior design Singapore maps the structure first, then draws the panel around it.
If the wall is the original HDB wall, you can fix a panel and a console with approved anchors. If it is a lightweight non-ceramic partition built for division, keep the TV weight low and use a wall bracket rated for the partition.
Size the console to the room
A 4-room flat is about 90 sqm, so the living room often takes a 2.0m to 2.4m console. Set the console at 450mm height for a low, calm line, and leave a 2.4m viewing distance from a 55-inch screen.
For HDB flat space saving, mount the console to the wall and skip bulky cabinets. The floor stays open, which reads larger in a Pasir Ris 5-room.
Cable management is the real job
The feature wall's value is hiding the mess. Follow these steps with your HDB Licensed Renovation Contractor in the Directory of Renovation Contractors:
- Mark the TV centre line and the console width before any panel goes up.
- Run power, HDMI and data points inside the carpentry, not on the surface.
- Cut a 120mm x 80mm brush plate behind the TV for cable pass-through.
- Add a recessed LED strip behind the panel for a soft evening glow.
- Label every cable at both ends so future swaps take minutes.
Materials that pass HDB checks
Use laminate carpentry for the console and a laminate or stone-look panel above. Both are HDB-approved materials and need no extra permission. Quartz or solid-surface countertops work if the console top doubles as a display ledge.
Vinyl or laminate flooring below ties the wall to the floor. An HDB renovation permit is required before works begin, and processing takes about 2 weeks, so declare the panel and console in the drawing.
Lighting and the open kitchen link
If you plan an HDB open concept kitchen, the feature wall often faces it across the living room. Open-concept kitchens are allowed in HDB, and new BTO kitchens are induction-ready, with gas following SP Group and SCDF rules.
Layer the light: a ceiling LED for base, a strip behind the panel for mood, and a floor lamp by the chair. The wall then reads as calm whether the kitchen is cooking or quiet.
Noise, timing and the bomb shelter
Noisy works like hacking and drilling are allowed only on weekdays from 9am to 6pm, with none on Sundays or public holidays. Book the panel fix and console fit inside those hours.
Keep the bomb shelter out of the plan. It stays untouched except for light fittings and laminated flooring, with the door in place, so do not build the feature wall across its front in a way that blocks the door.
Cost framing for the feature wall
Market ranges put a 4-room BTO renovation around S$30,000 to S$45,000 and a resale around S$50,000 to S$70,000 because of more hacking and rewiring. Treat these as market ranges, not fixed quotes, and scope the feature wall as a focused item.
Build a wall that lasts
A Pasir Ris TV feature wall should hide the cables, hold the screen safely, and set the room's tone without shouting. Plan the structure, size and light as one, and keep it inside HDB rules. Good HDB interior design Singapore makes that wall the quiet anchor of the whole living room.
When you want the wall drawn to your exact living room, our whole-house customization team can model the console, panel and cable route from your floor plan and deliver a feature wall that passes HDB on the first try.
