HDB Interior Design Singapore: TV Feature Wall Smart Home Wiring
HDB interior design Singapore now treats the TV feature wall as the wired heart of the living room, because smart home gear needs power and data planned in advance. A wall built after the renovation often shows ugly cables or forces drilling into protected surfaces. Planning the wiring at permit stage avoids both problems.
how HDB interior design Singapore wires the feature wall
An HDB renovation permit is required before works begin, and processing takes about two weeks. Use that window to decide where the TV, soundbar, and hub sit. Your HDB Licensed Renovation Contractor then includes concealed trunking in the plan. Concealed routes keep the living room clean and stay within HDB rules since no structural element is touched.
- Fix the screen height at about eye level when seated, roughly 100 to 120 centimetres from the floor.
- Run a conduit behind the laminate feature panel for HDMI and power.
- Add a data point near the hub for a stable smart home connection.
- Place a power socket inside a built-in cabinet to hide the adapter.
- Label every cable at both ends before the wall closes.
choose materials that hide tech
Laminate carpentry makes a tidy feature wall and hides the smart hub, the router, and the game console. A recessed niche backed with fabric softens sound and hides the subwoofer. HDB approved flooring in the living room pairs with a flush skirting so cable trunking disappears at the base.
smart home zones to wire once
- Lighting: a smart switch panel at the entrance controls the living room scenes.
- Climate: a sensor near the feature wall triggers the fan or air conditioner.
- Security: a camera feed routes to the hub behind the TV.
- Audio: in-wall rated cable links the TV to rear speakers without surface runs.
avoid common wiring mistakes
Do not cut into the structural wall to chase cables, since HDB forbids hacking load-bearing elements. Do not rely on a single socket for the whole hub, as overload trips the breaker. Do not place the hub where the household shelter door swings, because that zone stays protected.
future-proof the feature wall
Plan for gadgets you may add later. Leave a spare conduit and one extra data point behind the laminate panel so a new console or speaker drops in without new drilling. HDB rules still forbid hacking the structural wall, but a pre-run conduit solves that. This small step keeps the feature wall useful for years as your smart home grows, and it spares you a second renovation just to add a cable.
Also keep the hub cool. Electronics behind a closed cabinet trap heat, so cut a few vent slots in the laminate backing. A cooler hub lasts longer and avoids the flicker that ruins a movie night, and the slots stay hidden behind the cabinet doors.
A wired TV feature wall is the smartest upgrade in HDB interior design Singapore when done before the permit clears. Whole-house customization plans the screen, the storage, and the smart home hub as one system. Work with a team that runs the wiring right the first time, and your living room stays clean and connected for years.
